According to Progressive Dynamics you can indeed remove the existing converter unit from your Progressive Dynamics RV Power Control Center and replace it with the # PD4560LICSV for Lithium batteries.
I've linked you to a product description video. view full answer...
For just the legs that fit the Curt Q25 5th Wheel Head # C16565 you will use part # C16017 if you have the factory puck system on your 2014 Ford F-350 or part # C16963 if you have standard above-bed base rails installed.
These are direct replacements and either option will mount perfectly to the Q25 Head. I have attached a few short video reviews below that you can check out as well. view full answer...
For a brake controller I would recommend the Prodigy P3 Brake Controller part # 90195. This is our best selling brake controller because of how well it works and how easy it is to setup. This is a proportional brake controller that senses the amount of braking the tow vehicle is applying and applies a proportionate amount to the trailer brakes.
This controller has a very interactive menu with a ton of settings and presets that can be adjusted. For your situation where you would be towing... view full answer...
We have some aftermarket suspension parts for your 2000 Ford E-450 Class C:
- Steering Stabilizer # RM47MR
- Front Anti-Sway # RM-1139-115
- Rear Anti-Sway # RM-1139-147 (does not fit with auto chains)
And then we also have some air bags and jounce-style springs that can fit as well. If you're looking for OEM replacement parts for your suspension though, you'll have to check with a vehicle shop to get those types of parts. view full answer...
It sounds like you're looking for the Replacement #20 Rubber Shear Spring for MORryde Trailer and RV Suspension Systems # MR79UR.
These replacement blocks will work with the LRE4000 Series suspension systems for trailers with axle ratings between 6,501 lbs and 7,500 lbs, and RS Series suspension systems for trailers with axle ratings between 12,001 lbs and 15,000 lbs. view full answer...
I reached out to Lippert and the discontinued Coachmen steps you have do not have replacement steps available. The only solution is complete replacement. I wasn't able to find the exact step you have since the part number corresponds with the control module, but I believe it is a single step on your 2006 Forest River Lexington GTS.
If it is a single step, you will be able to use the Kwikee Electric RV Step Complete Assembly # LC3691461 as a replacement. This step measures 24" wide. Typically... view full answer...
I recommend using the RV Propane Gas Detector - 12 Volt - 2 Wire - Black # RS44FR and using the larger 7-1/4" long x 3-3/8" wide bracket for the installation as that should be a little larger than your current model 7770.2 gas detector. view full answer...
We do have the Replacement Control Panel for Atwood Water Heaters # AT91367 for your Atwood G6A-8E.
We do not carry the Dinosaur brand control panels. view full answer...
We do indeed offer a replacement latch/hardware kit for your Stromberg Carlson # VG-97-2000 5th wheel tailgate as part # VG-2000-2197. If you needed the cables and set screw, you'd need # 2000-CB. The cable kits are sold individually, so if you need cables for both sides, you'd want to order two of them. view full answer...
The Replacement Jam Nut # WM9073 referenced in your question is designed to replace those for the Wheel Masters 19J0J series liners. Based on the pictures I was able to pull up of the wheel covers on the 2001 Holiday Rambler motorhomes these do appear to be the same but it's difficult to say for sure without knowing exactly what model liners were installed. Unfortunately this type of information is not well kept by RV manufacturers.
If you can locate any model information on the existing... view full answer...
For the Pacer Performance Hi-Five Truck Cab Light Set # PP20-105 replacement lenses are not available. I called my contact at Pacer to confirm.
I also checked on the similar Optronics Amber Teardrop Light Set # CB-15AK but it too does NOT have replacement lenses available. view full answer...
We do offer replacement jack options for the Kwikee Level Best 3000 Hydraulic Leveling System, part # LC359278 for 10,000 lb jacks or part # LC359275 for 17,000 lb jacks. These jacks will work on all four corners. If you don't know which weight capacity you need and it's not printed on the jack anywhere, simply provide me with the part number of the jack and I should be able to reference this for you. view full answer...
It sounds like you are thinking about going with the Ultra-Fab Deluxe Electric Landing Gear Set # UF17-943010 as a replacement landing gear set for your 1996 Carriage Carri-Lite Cashay 28RK.
The Ultra-Fab Deluxe Electric Landing Gear Set # UF17-943010 is a great option that will raise, level and support your 1996 Carriage Carri-Lite Cashay 28RK. They have extra-large footplates that offer superior stability and a simple installation. You weld the hangers to the front of the trailer frame,... view full answer...
The pin locations for the Curt T-Connector # C55243 are different from your connector because the 55243 fits a 1999 - 2001 Ford F-250 and F-350 Super Duty with factory 4-flat. Since you input your vehicle info as a 2002 Ford F-350, 450, and 550 Cab and Chassis the only replacement options we have look like the Curt # C55774 which plugs into the US Car Connector which would be on the other end of your wiring harness. If just the 7-Way on your vehicle is needing to be replaced then the 55774... view full answer...
Yes we do have the following replacement brake parts for your Roadmaster RM3477 Tow Dolly # RM-2050-1.
Driver's-Side Brake Assembly # RM-4701-L
Passenger's-Side Brake Assembly # RM-4701-R
Replacement 10" Brake Drum # RM43FR
Grease Seal # 58846
Inner Bearing # L68149
Outer Bearing # L44649
The hub includes new races so you will only need the bearings and grease seal listed above for one hub. view full answer...
For the middle equalizer bolt and nut that fits the Tandem-Axle Trailer Hanger Kit for 2" Slipper Springs # APTT6SE you need the Equalizer Bolt with Cotter Pin and Castle Nut - 7/8" Diameter # 166078. If you would like to upgrade to a wet bolt, there is also the Wet Equalizer Bolt with Castle Nut and Grease Zerk - 4-11/16" Long - 7/8" Diameter # TRFA71063 available as well. view full answer...
The EB01-140 and EB01-145 are Redneck Trailer Supply part numbers for a Dexter 12-1/4 x 3-3/8 7-bolt brake assemblies for a 9-10K axle.
The proper replacements are available as part # 23-450-451, which includes the left and right self adjusting brake assembly. The mounting hardware is available separately as part # BRKH122510. view full answer...
It looks like we do have a replacement motor for the Power Gear 501473, it's the Replacement Motor for Lippert Power Gear Electric Leveling Jack System part # LC89CJ.
Unfortunately, we don't offer a replacement for the actual leg as the system is discontinued. view full answer...
The correct replacement module for your 909506000 is part # LC379606. We have confirmed this with Lippert on a few different occasions. view full answer...
The CC316-01 number you referred to is the original part number of the fan motor. Is it a replacement fan blade or motor you're needing? If that's the case, you'd use the # BVD0218-00-R replacement motor. If you were needing a replacement fan blade, one is available as part # BVD0216-00.
If you were needing the entire vent hood, I'd need the part number of the one you currently have. The hood part number would start with a PH, S0, BCL, or TCL. If you could provide that information, I'd... view full answer...
Go To Results